Processeur d'enceintes numérique avec DSP 2 entrées 6 sorties, pilotable en RS232, géré en 96KHz. Un vu-mètre par voie, égaliseurs paramétriques, interface très conviviale. Ce processeur est plus qu'intuitif pour un ingénieur son, tous les réglages sont disponibles, il est muni de tous les présets des systèmes OHM. Il est, en outre modifiable en fonction de vos besoins acoustiques. | Input Impedance | >10k Ohm electronically balanced | | Maximum Input Level | +20dBu | | Outputs | Four [Cred 2-4] or six [Cred 2-6] | | Outputs Impedance | | | Maximum Ouput Level | +20dBu into 600 Ohm load | | Sample Rte | 96kHz | | Frequency Response | 10Hz to 40kHz ,±1.0dB (filters disabled)
10Hz to 20kHz, ±0.25dB (filters disabled) | | THD | | | Dynamic Range | >111dB (A weighted, 22kHz bandwidth)
>108dB (A weighted, 22kHz bandwidth) | | Serial Comms Data | 38.4kbaud, format: 8 data, 1 stop, no parity | | Audio Inputs | 3 pin female XLR | | Outputs | 3 pin male XLR | | Serial Comms | 9 pin female `D type` | | Network Comms | Future Option | | Gain | +20dB to -80dB and mute, 0.2dB steps | | Output ch. source | Input A, Input B and SUM | | HP Filter Frequency | Off, 10Hz to 25,4kHz, 1/36 octave steps | | LP Filter Frequency | 10Hz to 25,4kHz, and off 1/36 octave steps | | HP / LP Filter Type | 12, 18 & 24dB / octave Bessel and Butterworth, 12, 24 and 48dB / octave Linkwitz Riley and 4th or 8th order hardman | | Maximum Delay | Input 400ms, Output 80ms | | Limiter | High performance limiter, adjustable threshold in 0.2dB steps, automatic time constants | | EQ Frequency | 10Hz to 25kHz, 1/36 octave steps | | EQ Gain | +15db to -15dB, 0.2dB steps | | EQ width | 5.0 to 0.1 octaves bandwidth, 1/36 octave steps | | Mains | 3 pin IEC | | Mains Power | universal switch mode PSU, 85V to 250V AC, 50/60Hz Audio | | Consumption | | | Dimensions (mm) | 44 x 482 x 254 (H x W x D) | | Weight (kgs) | 2.1 |
|
